Krion® cleaning kit

Classic stains
In case of classic stains on your solid surface product, proceed as follows : Clean the stain with water, paper towel or cloth to remove the excess. Moisten the green cleaning cloth and apply the specific K-CLEANER product to the stain. Rub in circular motions, then dry the surface. If the stain persists, repeat the application with K-CREAM and apply an amount that covers half the stain. Dampen the green cloth and make circular movements over the entire stain without pressing. Once the stain has disappeared, clean the entire surface evenly with the K-CREAM from the cleaning kit for more uniformity. Remove excess cream with the green cloth and rinse with water. Finally, to complete the cleaning, it is very important to dry the surface well. To do this, you can use the Grey drying cloth from the Cleaning KIT.

Difficult stains
Cleaning difficult stains on Solid Surface products is much easier than for other materials. Simply follow the steps below : Apply K-CREAM Microparticle Cleaner to the stain and dampen a white scouring pad. Rub the stains until they disappear in a circular motion. If necessary, repeat the action with light pressure. Finally, remove the excess cream with the green cloth, rinse the surface with water and dry it well with the grey cloth. If, after cleaning, you notice differences in finish between the area where the stain was and the rest of the surface, repeat the process around the treated area to homogenise the appearance of the surface until there is no difference.

Cleaning kit Krion video