Important information:

After manufacture and installation, your Corian® sink unit has a satin-like finish.However, as you use it, it will develop a patina over time. To ensure an even polish, please follow the care instructions provided in this guide. Rest assured that Corian® has a long life expectancy and will retain its beauty for many years to come if properly cared for.

Robinet eau chaude

AVOID OBJECTS HITTING THE EDGES OF BATHTUBS AND SINK UNITS

Corian® has a high impact resistance due to the combination of its raw materials, however it is recommended to avoid impacts with objects on the edges. Should an impact cause damage to the material, it can be repaired by a specialist processor. Please contact us to be referred to our approved partners.

AVOID USING TAPS AT VERY HIGH TEMPERATURES

You should be particularly careful when using taps that supply hot water instantly at high temperatures as this is not recommended. Such a change in temperature could not only cause burns to the person handling it, but also damage the bowl.

Produit chimique

AVOID HARMFUL CHEMICAL SPILLS

Avoid harmful chemicals such as pipe cleaners and paint removers. If this happens, the stain should be removed as soon as possible with plenty of soapy water to prevent damage. Do not expose surfaces to strong chemicals for prolonged periods (more than 16 hours). Be particularly careful with solvents, acetone, Methylene and drain cleaners, in case of accidental exposure, rinse with plenty of water.

CLEANING THE SOLID SURFACE

This antibacterial stone dust material helps to keep installation areas clean, aseptic and in perfect condition. The non-porosity of Corian® prevents the growth of bacteria, reinforced by the absence of joints and protruding corners.  All these advantages allow your product to be kept in perfect condition with very simple maintenance. In addition to easy cleaning, the fact that the material can be repaired on site is a great advantage and a significant difference compared to other materials.

This allows you to keep your home and facilities looking as good as new. Solid surface is an easy-to-clean material and cleaning should not be neglected. Although the surface is not absorbent due to its non-porosity, immediate action without letting the stains rest on the surface of the material will make cleaning easier and faster. It is important to wipe the surfaces completely to avoid traces of limescale or remains of detergent or cleaning agents. Your product may mark, the stain should not be left for more than 16 hours, otherwise the stain may be unremouvable.

Nettoyage solid surface

MAINTENANCE PRECAUTIONS

It is not advisable to use very strong cleaning products based on hydrochloric acid or products dedicated to the cleaning of pipes. It is also not recommended to use acetone-based products, industrial detergents and paint solvents. If any of these products are spilled on the surface, they should be removed immediately by washing with plenty of water and then cleaning thoroughly to prevent damage. Such damage can be repaired by a specialist.

CORIAN AND COVID 19